FAST FLASH® - self-adhesive flashing for any roof project

Fast Flash is ideal for anywhere requiring a quick and secure flashing solution. Fast Flash can be installed on roofs with a slope of min. 5° and on almost all roof materials.

Fast Flash is environmentally friendly and easy to install as the reverse is self-adhesive, as well as being flexible and very workable.

Use Fast Flash for flashing…

Against wall

Fast Flash can be used on external walls and fire walls of e.g. brick, concrete or light external walls.

Chimney

Fast Flash provides easy and secure flashing for brick or steel chimneys.

Dormer window

Fast Flash is the ideal solution for flashing around roof constructions.

Roof valley

Fast Flash can be used as flashing where the roof valley joins the base of the roof.

Skylight/solar panel

Fast Flash provides quick and efficient flashing around dormer windows, skylights and solar panels.

Ventilation cap

Fast Flash is the obvious solution for flashing around ventilation and waste pipes.

Product data and accessories

Fast Flash is a composite consisting of a stretchable aluminum grid, embedded in an environmentally friendly polymer rubber. Fast Flash is self-adhesive on the reverse and protected by cover foil that is removed before installation.

rulle-perform
VVS no.Supply programmRAL-colours 
288080028 Fast Flash 5000 x 280 mm Grey - RAL 7037
288086028 Fast Flash 5000 x 280 mm Anthracite gray - RAL 7043
288081028 Fast Flash 5000 x 280 mm Black - RAL 9011
288084028 Fast Flash 5000 x 280 mm Red - RAL 8004
288080037 Fast Flash 5000 x 370 mm Gray - RAL 7037
288086037 Fast Flash 5000 x 370 mm Anthracite gray - RAL 7043
288081037 Fast Flash 5000 x 370 mm Black - RAL 9011
288084037 Fast Flash 5000 x 370 mm Red - RAL 8004
288080056 Fast Flash 5000 x 560 mm Gray - RAL 7037
288086056 Fast Flash 5000 x 560 mm Anthracite gray - RAL 7043
288081056 Fast Flash 5000 x 560 mm Black - RAL 9011
288084056 Fast Flash 5000 x 560 mm Red - RAL 8004
288080112 Fast Flash 5000 x 1120 mm Gray - RAL 7037
288086112 Fast Flash 5000 x 1120 mm Anthracite gray - RAL 7043
288081112 Fast Flash 5000 x 1120 mm Black - RAL 9011
288084112 Fast Flash 5000 x 1120 mm Red - RAL 8004
288059532 Adhesive - cartridge 290 ml Gray - RAL 7037
288059531 Adhesive - cartridge 290 ml Anthracite gray - RAL 7043
288059529 Adhesive - cartridge 290 ml Black - RAL 9011
288059536 Adhesive - cartridge 290 ml Red- RAL 8004
288058000 Hammer ...

Fixing - quick and easy

Easy adaptation

Fast Flash is easy to adapt to any project. Fast Flash is easy to tailor with a Stanley knife or plate shears. For greater strength and to help it keep its shape, you may want to fold the edge of the flashing. Doing so also makes the result more attractive.

Fast installation

Fast Flash is quick and easy to install. If necessary, Fast Flash can be pre-bent before installation.

Fast Flash adheres to all common building materials such as brick, concrete, metal, glass and many painted surfaces as well as certain types of plastic.

When attaching Fast Flash to porous surfaces such as brick and concrete, the surface must be pre-treated with Primer.

To clean surfaces of grease, oil and release agents use cleaning wipes. The surfaces should also be lightly matted. This is best done using an abrasive sponge.

Storage

To avoid Fast Flash sticking together when stacked or rolled during storage it is important to ensure that the protective film on the reverse is not removed.

The following are required for the installation of Fast Flash
  • Plate shears or Stanley knife.
  • Cleaning Wipes – to clean surfaces of grease, oil and release agents.

Adapt and bend

Remove the foil on the reverse and press Fast Flash into place