PERFORM roof flashing
- beautiful, durable and lead-free solutions for any flashing application
PERFORM flexible flashing can be used in any flashing solution. By clicking on the illustration below and moving the pointer to the numbers, further information will appear.
PERFORM flexible flashing material can be used in any flashing solution, including flat and profiled roofing.
The flashing sheet offers the same properties and provides the same tightness as lead. Just like lead, this material has a self-contained structure with a high dimensional stability which provides a "porous/ breathable" covering.
Working with PERFORM flexible flashing is very much like working with lead only it is even easier to use and shape because of the good stretching properties and low weight.
- For all types of roofing
- Fixing without adhesion
- Fixing without adhesion
- Sticks to all standard construction materials when fixed using PERFORM Adhesive.
Product data and accessories
PERFORM flexible flashing is a composite consisting of a stretchable aluminum grid, embedded in an environmentally friendly polymer rubber. The material offers the same functionality as lead at only a third of the weight, and it has excellent stretching properties.
|288050031||Roll 400X31 cm gray RAL 7037||4,5 kg||Roll thickness: 12 cm|
|288050125||Roll 400X125 cm gray RAL 7037||18,0 kg||Roll thickness: 12 cm|
|288056031||Roll 400X31 cm Anthracite gray RAL 7043||4,5 kg||Roll thickness: 12 cm|
|288056125||Roll 400X125 cm Anthracite gray RAL 7043||18,0 kg||Roll thickness: 12 cm|
|288051031||Roll 400X31 cm black RAL 9011||4,5 kg||Roll thickness: 12 cm|
|288051125||Roll 400X125 cm black RAL 9011||18,0 kg||Roll thickness: 12cm|
|288052031||Roll 400X31 cm terracotta RAL 8012||4,5 kg||Roll thickness: 12cm|
|288052125||Roll 400X125 cm terracotta RAL 8012||18,0 kg||Roll thickness: 12cm|
|288053031||Roll 400X31 cm brown (mocha) RAL 8019||4,5 kg||Roll thickness: 12cm|
|288053125||Roll 400X125 cm brown (mocha) RAL 8019||18,0 kg||Roll thickness: 12cm|
|288059532||Adhesive – cartridge 290 ml grey RAL 7037||0,5 kg||Fits a regular joint filler gun|
|288059531||Adhesive - cartridge 290 ml anthracite gray RAL 7043||0,5 kg||Fits a regular joint filler gun|
|288059529||Adhesive – cartridge 290 ml black RAL 9011||0,5 kg||Fits a regular joint filler gun|
|288059534||Adhesive – cartridge 290 ml terracotta RAL 8012||0,5 kg||Fits a regular joint filler gun|
|288059102||Glue 20 gr.||---||Little tube|
|288059760||FlashSeal – grey||1,13 kg||Påføres med pensel|
|288059761||FlashSeal – black||1,13 kg||Påføres med pensel|
|288059764||FlashSeal – tile red||1,13 kg||Påføres med pensel|
FixingEasy to shape and mount
PERFORM flexible flashing is fixed easily and fast. The light weight and the good stretching properties ensure simple handling and shaping of the flashing.
For obtaining a perfect fit, PERFORM flexible roof flashing is formed to fit the roof or underlying material by means of a Perform Dresser.Placing the flashing material
As the stretching ability is 60% lenghtwise and 20% breadthwise it is important to place the material according to the actual needs.
The side with the protection foil is the visible or upper side of the material. To prevent the flashing material from getting dirty, the foil should not be removed until the material is to be processed.Fold on edge
Perform A/S recommends that the edge of the material is be folded as shown in the picture to the right. By folding the bottom edge it becomes significantly stronger and the roof covering then becomes even more stable in shape.Fixing without adhesives
Usually PERFORM flexible flashing is fitted without the use of adhesive since the material is self-contained like lead. A self-contained flashing is porous/breathable and prevents the formation of humidity and condensation under the area covered. The actual flashing work can be carried out under various weather conditions, and craftsmen experienced in working with lead flashing can easily apply PERFORM flexible flashing . You make terminations against walls, roofs, dormers, valley gutters etc. in the same way as with lead, and you can make joints by folding up.Fixing using adhesion
Whenever deemed necessary, you can make terminations against walls, roofs, dormers, valley gutters etc. using a spot adhesion technique. For the adhesion process use PERFORM Adhesive which sticks to all standard construction materials, such as brick, concrete, metal, glass and many lacquered surfaces and certain types of plastic. When gluing on porous surfaces, such as brick or concrete, Danalim Primer 961 should be applied first to obtain good bonding.
If you want make joints using overlapping and adhesive techniques instead of folding up the sheets, you will benefit from fastening the parts using PERFORM Glue. In this way it will be possible to shape the material as required before finally gluing the joints using PERFORM Adhesive. Finally, seal all joints with PERFORM Adhesive.
PERFORM Adhesive hardens most effectively at a temperature over 5 degrees C.
- Remember to place the flashing material correctly according to the actual need for stretching ability.
- Cut the covering by means of a Stanley knife or a sheet metal shears.
- Fold bottom edges.
- When pre-fixing and shaping of joints are required, use PERFORM Glue.
- When gluing on zinc, first score the surface with a steel cloth, to make sure that the flashing material obtains good bonding.
- Use the PERFORM Dresser.
- PERFORM Adhesive is applied after processing.
- At exposed locations, such as by the sea, consider gluing terminating ends to the underlying material using PERFORM Adhesive.
- To prevent the material from getting dirty, the protection foil should not be removed until the material is to be processed.
- The surface can be cleaned with vinyl cleaner.